. . HOME GERMAN ENGLISH IMPRINT

Photovoltaics

For optimising, distribution and monitoring the self-generated energy at photovoltaic units

Back to productlist
Photovoltaic-Optimizer
type input output design info
AD-PVO 2000
VarioPass 3 configurable
3x 230V AC
3x 0...100A AC via
clamp on/split core current transformer
(incl. in the set)
Load-relay: 1 normally open
Error-relay: 1 change-over contact
housing for
DIN-rail mounting
71x90x58mm (IP20)
Download
AD-PVO 3000
VarioPass 3 configurable
3x 230V AC
3x 0...100A AC via
clamp on/split core current transformer
(incl. in the set)
Anlog output: 0/4...20mA; 0/2...10V
Error-relay: 1 change-over contact
(att. to region regulations)
housing for
DIN-rail mounting
71x90x58mm (IP20)
Download
AD-PVO 6000
VarioPass 3 configurable
3x 230V AC
3x 0...100A AC via
clamp on/split core current transformer
(incl. in the set)
Load-relay: 3 normally open
Error-relay: 1 change-over contact
housing for
DIN-rail mounting
105x90x58mm (IP20)
Download
Description:
The Photovoltaic-Optimizer AD-PVO 2000 and AD-PVO 6000 monitors the supply of solar energy to the main connection of a building. If the supply
output exceeds a limiting value set by the customer via a PC, one or several internal output relay is triggered. With this switching relays, electric
consumers (i.e. electric heating rod in the process water tank of the heating, air-conditioning device or heat pump) can now be triggered. The
device is compatible with most heat pumps with SG-Ready logo. The AD-PVO 3000 has an analog output, which can be controlled by the most
common thyristor switches. Thus resistive loads (eg electric heaters) can be adjusted continuously. In addition, all variables of the three-phase
network (voltage, current, power, etc.) can be displayed and looged via AD-Studio. With the AD-PVO 2000, 3000 or 6000, the energy is converted
on site and not fed back into the public low-voltage network.
Note:
For the operation of the AD PVO 3000 with a thyristor switch, please pay attention to region- and country-specific regulations (technical
connection requirements).
Photovoltaic-Optimizer-Set
type description info
AD-PVO 2000S
- photovoltaic-optimizer
- screw-in heater
Photovoltaic-Optimizer-Heater-Set
for direct use in the hot water tank, consisting of:
1 pcs. AD-PVO 2000 photovoltaic-optimizer
1 pcs. AD-HST screw-in heater (1,5" with temperature regulator and safety thermostat)
Download
AD-PVO 2000S-DLE
- photovoltaic-optimizer
- continuous-flow heater
Photovoltaic-Optimizer-Continuous-Flow-Heater-Set
with storage water charging system. For hot-water tanks without capability of connecting additional heater.
Set consists of:
1 pcs. AD-PVO 2000 photovoltaic-optimizer
1 pcs. AD-DLE coninuous-flow heater (consisting of: continous-flow heater, insulated box, circulation pump
          and thermostat distribution beam)
Download
AD-PVO 6000S
- photovoltaic-optimizer
- screw-in heater
Photovoltaic-Optimizer-Heater-Set
for direct use in the hot water tank, consisting of:
1 pcs. AD-PVO 6000 photovoltaic-optimizer
1 pcs. AD-HST screw-in heater (1,5" with temperature regulator and safety thermostat)
Download
AD-PVO 6000S-DLE
- photovoltaic-optimizer
- continuous-flow heater
Photovoltaic-Optimizer-Continuous-Flow-Heater-Set
with storage water charging system. For hot-water tanks without capability of connecting additional heater.
Set consists of:
1 pcs. AD-PVO 6000 photovoltaic-optimizer
1 pcs. AD-DLE coninuous-flow heater (consisting of: continous-flow heater, insulated box, circulation pump
          and thermostat distribution beam)
Download
Accessory
type description

info

AD-HST15
screw-in heater
screw-in heater with temperature regulator and safety thermostat,
mounting length: 300mm, unheated zone: 150mm, power: 3x 500W, fitting: 1½"; (DIN ISO 228)
Download
AD-HST35
screw-in heater
screw-in heater with temperature regulator and safety thermostat,
mounting length: 480mm, unheated zone: 100mm, fitting: 1½"; (DIN ISO 228)
power zone 1: 500W, zone 2: 1.000W and zone 3: 2.000W
Download
AD-DLE
continuous-flow heater
continuous-flow heater set
consisting of: continous-flow heater, insulated box, circulation pump and thermostat distribution beam
Download
VarioPass 3
configuration set
USB-configuration-set
consisting of: AD-VarioPass 3 USB-adapter, AD-UART+ rippon cable (8cm), USB-cablel (1,5m A/B)
and configuration software AD-Studio
Download
Back to productlist

Informationen dieser Seite finden Sie Deutsch unter Photovoltaic

We are sure that your individual question will be answered: vertrieb@ad-messtechnik.de, Phone: +49 (0)7046-875 or Fax: +49 (0)7046-7678