Filter searchSALT VS10-230V, SALT VS10-24V
Description
Business data
| Order number | |
|---|---|
| SALT VS10-230V | Ventilsteuerung mit 230 VAC-Versorgung |
| SALT VS10-24V | Ventilsteuerung mit 24 VDC-Versorgung |
Information
| Downloads | |
|---|---|
| Safety instructions |  ad-safety-instructions.pdf (43 kB) |
Technical specifications
| Kontakteingang dP | |
|---|---|
| Type | Auswertung eines potentialfreien Kontakts |
| Mindest Kontaktdauer | 1 s |
| Ventil-Steuerausgang | |
| Type | Aktiver Ausgang (geschalteter Minus) |
| Nenn-Ausgangsspannung | 24 V DC |
| Ausgangsspannung Volllast | Min. 18 V DC |
| Ausgangsspannung Leerlauf | Max. 28 V DC |
| Max. Ausgangsstrom | 1 A DC |
| Current limit | Ca. 1,1 A DC |
| Supply | |
| Voltage range AC | 230 V AC +/- 10%, 50/60 Hz |
| Nominal voltage AC | 230 V AC |
| Voltage range DC | 24 V DC +/- 10% |
| Nominal voltage DC | 24 V DC |
| Power consumption AC / DC | 11 VA / 2 W (Angabe ohne Ventile) |
| Transmission behaviour | |
| Response time | Ca. 0,5 s |
| Housing | |
| Dimensions (WxHxD) | 180x180x75 mm (ohne Verschraubungen) |
| Type of protection | IP 65 |
| Connection method | Spring force terminal |
| Terminals, wire cross section | 1,5 mm² flex wire / 1,5 mm² one wire |
| Gewicht VS10-230V | Ca. 750 g |
| Gewicht VS10-24V | Ca. 350 g |
| Manner of fastening | Wandaufbaugehäuse |
| Environmental conditions | |
| Ambient temperature | -10 ... 60 °C |
| Storage and transport | -10 ... 70 °C (no condensation) |
| EMC | |
| Product family standard | EN 61326-1 1) |
| Emitted interference | EN 55011, CISPR11 Cl. B, Gr. 1 |
| Electrical safety requirements | |
| Product family standard | EN 61010-1 |
| Overvoltage category | II |
| Elevation | Max. 2000 m |
| Pollution degree | 2 |
| Max. permanent working voltage | 300 VAC |
| Galvanic isolation, test voltages | |
| Low voltage / power supply | 4 kV, 50 Hz (1 min.) |
| Protection circuits | |
| Input | Electrical surge protection |
| Output | Schutz gegen Überstrom |
| Power supply | Protection against overvoltage, overcurrent and reverse polarity |
| 1) During checking, slight signal deviations are possible. | |
Block and wiring diagram
Dimensions
CAD / CAE Daten
CAD model is not yet available for this product.
The CAD product overview can be found at: adamczewski.partcommunity.com