AD-SWK 6 WG

Description

With the current converter AD-SWK 6 WG up to three independent alternating current magnitudes can be converted to three alternating voltages of 0-10 V. The frequency-response curve at the output is equivalent to input. There are 3 switchable input ranges available. Inputs, outputs and supply voltage are galvanically separated from each other. The outputs refer to a common mass. An integral electronic wide range power pack with high efficiency prevents strong increase in heat.

AD-SWK 6 WG

Application

For conversion of up to three alternating currents to three alternating voltages

Business data

Order number
AD-SWK 6 WG
Identifiers
Customs tariff number / country of origin 8543 70 90 / Deutschland

Information

Downloads
Data sheet pdf en-swk6.pdf (199 kB)
Safety instructions pdf ad-safety-instructions.pdf (43 kB)

Technical specifications

Input
Measuring range 0 ...1,5 / 2 / 3 A ACs- switchable
Max. measurable harmonic 80 (4 kHz)
Ct size (inside diameter) <8 mm
Permanent overload 120 % of the rated value
Temporary overload (1s) Rated value x 20
Output
Output range 0 ... 10 V ACs (7,07 V ACeff)
Min. burden 10 kOhm
Accuracy
Unit <0,5 %
Temperature influence <100 ppm / K
Phase backfill Input/Output Output 3,6° lagging
Supply
Supply voltage AC 50 ... 253 V AC
Nominal voltage AC 230 V AC
Supply voltage DC 20 ... 253 V DC
Nominal voltage DC 24 V DC
Power consumption AC / DC 1,8 VA / 0,8 W
Housing
Connection method input Split core current transformer
Connection method Spring force terminal
Manner of fastening 35 mm DIN rail 35mm
Dimensions (WxHxD) 138x80x64(88)mm
Weight 280 g
Environmental conditions
Ambient temperature -10 ... 50 °C
Storage and transport -10 ... 70 °C (no condensation)
EMC
Product family standard EN 61326-1
Emitted interference EN 55011, CISPR11 Cl. B, Gr. 1
During checking, slight signal deviations are possible
Electrical safety requirements
Product family standard EN 61010-1
Overvoltage category II
Pollution degree 2
Safety measurement EN 61010-2-030
Measurement category CAT III
Galvanic isolation, test voltages
Input/output 2,2 kV AC + Test voltage of the cable of minimum 1000 V
Signal/auxiliary voltage 3 kV RMS
Working voltage 300 V AC/DC
Protective systems
Input/output Over voltage and over current
Power supply Over voltage, over current and over temperature

Block and wiring diagram

AD-SWK 6 WG

Dimensions

AD-SWK 6 WG

CAD / CAE Daten

Under "Generate CAD", select the desired CAD model for this product.
For this purpose, registration with our CAD database "PARTcommunity" is required.
The complete CAD product overview can be found at: adamczewski.partcommunity.com

AD-SWK 6 WG

Display and operating elements

On: LED for operating display in green
Selection of input: Switch for the input ranges
Cookie settings
made with ♡ by andres.media