AD-TV 1 GX

Description

The isolation amplifier AD-TV 1 GX, with a construction width of only 6.2 mm, serves the galvanic separation of DC voltage signals. The output signal follows linear the input variable and is, up to a limiting value, independent of the connected burden (0-10 VDC, 1:1 input/output). Due to the narrow design, a high packing density is achieved. In combination with a DIN rail connector, the wiring is considerably reduced.

AD-TV 1 GX

Application

Burden amplification and galvanic disconnection of impressed DC voltage signals.

Specific characteristics

narrow 6.2mm construction Supply via DIN rail connector

Business data

Order number
AD-TV 1 GX
Accessory
DIN-rail connector AD-GX Connector

Information

Downloads
Data sheet pdf en-tv1gx.pdf (189 kB)
Tender text zip tv1gx.zip (565 Bytes)
Safety instructions pdf ad-safety-instructions.pdf (43 kB)

Technical specifications

Input voltage
Measuring range 0 ... 10 V
Input resistance 100 kOhm
Output voltage
Output range 0 ... 20 mA
Min. burden 500 Ohm
Residual ripple < 0,1 %
Current limit < 28 mA
Transmission behaviour
Response time < 50 ms (10-90 %)
Linearity error < 0,1 %
Temperature influence < 70 ppm/K
Supply
Voltage range 18 ... 30 V DC
Nominal voltage 24 V DC
Power consumption < 850 mW
Housing
Dimensions (WxHxD) 6,2 x 92 x 101 mm³
Manner of fastening DIN rail 35mm EN 50022
Type of protection IP 20
Connection method Screw clamp (2,5 mm² flex wire / 4 mm² one wire)
Bolting torque terminals 0,5 Nm
Weight ~ 70 g
Environmental conditions
Ambient temperature -10 ... +50 °C
Storage and transport -10 ... +70 °C (no condensation)
EMC
Product family standard 1) EN 61326-1
Emission 2) EN 55011, CISPR11 Cl. A, Gr. 1
1) During electromagnetic disturbance minor changes in output signal are possible.
2) Warning:
This device is not intended to be used in residential areas and can not ensure adequate protection of radio reception in such environments.
Electrical safety requirements
Product family standard EN 61010-1
Overvoltage category II
Pollution degree 2
Galvanic isolation, test voltages
Input/output 1,5 kV, 1 min
Signal/auxiliary voltage 1,5 kV, 1 min

Block and wiring diagram

AD-TV 1 GX

Dimensions

AD-TV 1 GX

We only use technically necessary cookies to improve the user-friendliness of our site.
Cookies for analysis and marketing purposes are not used!
You can find further information in our privacy policy.
made with ♡ by andres.media