AD-TV 200 EV

Description

The separation amplifier AD-TV 200 EV serves the galvanic separation of amplification, conversion or adjustment of analogue measuring signals. The slide-in card can contain up to 4 completely independent channels. With all channels input, output and supply voltage are galvanically separated. The channels are also completely insulated amongst each other. At each channel, input signal type and output signal type can be freely selected. A spindle trimmer is located at the front for direct adjustment. Due to the narrow construction (4 TE) up to 84 channels can be integrated in one standard module carrier.

AD-TV 200 EV

Application

Galvanic separation, adjustment, amplification and conversion of analogue measuring signals in up to 4 independent channels.

Business data

Order number
ADTV201EV1	1 ch (nominal voltage 230 V AC)
ADTV201EV5	1 ch (nominal voltage 24 V DC)
ADTV202EV1	2 ch (nominal voltage 230 V AC)
ADTV202EV5	2 ch (nominal voltage 24 V DC)
ADTV203EV1	3 ch (nominal voltage 230 V AC)
ADTV203EV5	3 ch (nominal voltage 24 V DC)
ADTV204EV1	4 ch (nominal voltage 230 V AC)
ADTV204EV5	4 ch (nominal voltage 24 V DC)
Identifiers
EClass	27210120

Information

Downloads
Data sheet	en-tv200ev.pdf (251 kB)
Safety instructions	ad-safety-instructions.pdf (43 kB)

Technical specifications

Input
Measuring range current	0 ...20 mA; 4 ... 20 mA¹⁾
Input resistances	50 Ohm
Measuring range voltage	0 ... 10 V, 2 ... 10 V¹⁾
Input resistances	100 kOhm
Output
Output range current	0 ... 20 mA; 4 ... 20 mA¹⁾
Max. burden	500 Ohm
Output range voltage	0 ... 10 V; 2 ... 10 V¹⁾
Min. burden	500 Ohm
Residual ripple	< 50 mVss
¹⁾switchable and adjustable per channel; others on request
Transmission behaviour
Basic accuracy	< 0,3 %
Temperature influence	< 100 ppm/K
Supply
Supply voltage	20 ... 253 V DC / 50 ... 253 V AC
Nominal voltage	24 V DC / 230 V AC
Power consumption	5,4 W / 11 VA
Type of construction
Manner of fastening	19"-Europakarte 4TE
Type of protection	IP 00
Weight	Ca. 160 g
Environmental conditions
Ambient temperature	-10 ... 50 °C
Storage and transport	-10 ... 70 °C (no condensation)
EMC
Product family standard	EN 61326-1 ²⁾
Emitted interference	EN 55011, CISPR11 Cl. B, Gr. 1
²⁾ During electromagnetic disturbance minor changes in output signal are possible.
Electrical safety requirements
Product family standard	EN 61010-1
Overvoltage category	II
Pollution degree	2
Galvanic isolation, test voltages
Input/output	0,5 kV RMS (1 min.)
Channel/channel	0,5 kV RMS (1 Min.)
Signal/auxiliary voltage	3 kV RMS (1 min.)
Protective systems
Input/output	Electrical surge protection
Power supply	Electrical surge and reverse current protection

Block and wiring diagram

AD-TV 200 EV

Dimensions

AD-TV 200 EV

CAD / CAE Daten

CAD model is not yet available for this product.

The CAD product overview can be found at: adamczewski.partcommunity.com