AD-EV-Adapter EV


With the Eurocard adapter AD-EV-Adapter, existing systems in 19"-technology can be equipped with current DIN rail technology. This means that plants can continue operate without major retrofitting costs. These adapters can be used to mount and clamp current Adamczewski DIN-rail units with the housing design GL or GS. For the connection of the devices, push-in terminals are mounted in the rear part of the adapter, which are directly connected to the 32-pole blade strip. On request, the EV adapter can be delivered ready assembled and wired. However, customer-side wiring is also possible. To prevent the risk of dangers when loosening cables, there are mounting slots for cable ties. On request, it is possible that the control parts of the DIN rail device protrude through an opening in the front panel of the Eurocard.

AD-EV-Adapter EV


Retrofitting or expanding existing 19"-plants with current Adamczewski devices in Hutschienentechnik.

Specific characteristics

  • 6TE front panel width
  • GL and GS casing can be mounted on adapter
  • Push-in terminals for safe and fast wiring

Business data

Order number
AD-EV-Adapter EV


Data sheet pdf en-evadapter.pdf (124 kB)
Safety instructions pdf ad-safety-instructions.pdf (43 kB)

Technical specifications

Dimensions (WxHxD) 30,5x128,4x165 mm
Type of protection IP 00
Connection method Push-In-Clamps
Terminals, wire cross section 1,5 mm² flex wire / 2,5 mm² one wire
Weight ~ 180 g
Manner of fastening Eurocard 100x160 mm
Environmental conditions
Ambient temperature -10 ... 60 °C
Storage and transport -10 ... 70 °C (no condensation)
Electrical safety requirements
Product family standard EN 61010-1
Overvoltage category II
Pollution degree 2


AD-EV-Adapter EV

CAD / CAE Daten

CAD model is not yet available for this product.

The CAD product overview can be found at:

Cookie settings
made with ♡ by