AD-HSH 50 WG, AD-HSH 100 WG, AD-HSH 200 WG

Description

With the AD-HSH xxx WG it is possible to mount three Adamczewski split-core current transformers AD-KSW 50 WG, AD-KSW 100 WG or AD-KSW 200 WG together on the DIN rail. The output currents (max 33.33 mA) are provided via terminals. The AD-HSH-S is supplied fully assembled, therefore the size of the folding current transformer must be specified when ordering.

AD-HSH 50 WG, AD-HSH 100 WG, AD-HSH 200 WG

Application

Mounting of split-core current transformers on the DIN rail.

Business data

Order number
AD-HSH 50 WG	50 A AC primary current
AD-HSH 100 WG	100 A AC primary current
AD-HSH 200 WG	200 A AC primary current
Identifiers
Customs tariff number / country of origin	8504 31 29 / Deutschland

Information

Downloads
Data sheet	en-hshxxwg.pdf (188 kB)
Safety instructions	ad-safety-instructions.pdf (43 kB)

Technical specifications

Housing
Dimensions (WxHxD)	134,9x77x91 mm
Type of protection	IP 20
Connection method	Spring clamp terminals
Terminals, wire cross section	1,5 mm² flex wire / 2,5 mm² one wire
Weight	~ 520 g (incl. split-core transformers)
Manner of fastening	35 mm DIN rail 35mm
Environmental conditions
Ambient temperature	-10 ... 60 °C
Storage and transport	-10 ... 70 °C (no condensation)
EMC
Product family standard	EN 61326-1 ¹⁾
Emitted interference	EN 55011, CISPR11 Cl. B, Gr. 1
Electrical safety requirements
Product family standard	EN 61010-1
Overvoltage category	II
Pollution degree	2
Elevation	Max. 2000 m
Safety measurement	61010-2-030
Measurement category	CAT III
Max. permanent working voltage	300 VAC
Galvanic isolation, test voltages
Input / output	2500 V AC (1 min) + cable insulation
Protection circuits
Output	Internal voltage limitation with open secondary lines

¹⁾ During checking, slight signal deviations are possible.

Dimensions

AD-HSH 50 WG, AD-HSH 100 WG, AD-HSH 200 WG

CAD / CAE Daten

CAD model is not yet available for this product.

The CAD product overview can be found at: adamczewski.partcommunity.com