AD-LM 12 FE-Vario, AD-LMB 12 FE-Vario

Description

The signal/fault indicator AD-LM 12 FE-Vario, for mounting at the front of the control panel, informs with 12 multicolour leds about errors or operating conditions with glowing or blinking. Because of the multicolour leds, it`s not necessary to change the leds for changing the colour. So it`s very easy to change the technical appliance. The AD-LM 12 Vario can catch and save short pulses at the inputs, and for resetting its possible to connect external buttons. The device comes with 24 independet inputs which are easy to allot to one or more leds. Its possible to generate a colour- change by changing the input. A keypress on the touch key at the front of the device, generates a light test for all leds (all leds white). The AD-LM 12 Vario has a RS485 bus interface, which can used for the configuration over the AD- Studio (PC). All messages can be labelled with the aid of inserted strips (i.e. paper, foil etc.). This signal/fault indicator is also available with no physical inputs as a bus version (AD-12 Vario LMB). This can be controlled by the remote terminal block AD-AB 32 or by an external master.

AD-LM 12 FE-Vario, AD-LMB 12 FE-Vario

Application

Indicate signal/fault status of machines or plants.

Specific characteristics

  • detachable terminal clamps
  • multicolour leds
  • configuration by PC
  • 24 independent inputs
  • short-circuit proof feeding voltage
  • external terminal- block for hat rail available

Business data

Order number
AD-LM 12 FE-Vario Standard version with physical inputs
AD-LMB 12 FE-Vario Bus- version without physical inputs
Accessory
AD-AB 12/24/32 WG Terminal block for hat rail available with up to 32 inputs (only adaptable with the bus version) see: Datasheet AD-AB 12/24/32
Identifiers
Customs tariff number / country of origin 8531 20 20 / Deutschland

Information

Technical specifications

Active inputs
Voltage range 5 ... 30 VDC
Input resistance > 45 kOhm
Supply
Voltage range AC 50 ... 253 V AC, 50 / 60 Hz
Voltage range DC 22 ... 253 V DC
Nominal voltage AC / DC 230 V AC / 24 V
Power consumption AC / DC 7,0VA / 3,8W
Feeding voltage for contacts
Voltage 4,8 ... 5,2 V DC
Strength Max. 1 mA
Relay
Max. load AC 250 V / 2 A (cos phi = 1)
Max. load DC 50 V / 0,5 A (resistive load)
Cycles AC- load Ca. 100000 (cos phi = 1)
Cycles DC- load Ca. 100000 (resistive load)
Housing
Dimensions (WxHxD) 144x72x71 mm
Front panel cut out 140x68 mm
Protection class panel IP 54
Protection class connection IP 20
Connection method Detachable terminal clamp
Manner of fastening Panel-mount-case
Terminals, wire cross section 1,0 mm² Strand with wire end ferrule / 1,5 mm² one wire
Weight 260 g
Environmental conditions
Ambient temperature -10 ... 50 °C
Storage and transport -10 ... 70 °C (no condensation)
EMC
Product family standard EN 61326-1
Emitted interference EN 55011, CISPR11 Cl. B, Gr. 1
Electrical safety requirements
Product family standard EN 61010-1
RS485- Bus
Max. attendance 32
Max. length of bus 100 m
Bus termination 120 Ohm (both sites of the bus)
Wiring Bus topology
Terminal assignment
Clamp Connection name
1 Supply voltage
2 Supply voltage
3 Contact supply
4 Contact supply
5 Input for light test
6 Ground
7 Ground
8 Ground
9 Relay NO
10 Relay COM
11 Relay NC
12 RS485 A
13 RS485 B
14 Input 1
15 Input 2
16 Input 3
17 Input 4
18 Input 5
19 Input 6
20 Input 7
21 Input 8
22 Input 9
23 Input 10
24 Input 11
25 Input 12
26 Input 13
27 Input 14
28 Input 15
29 Input 16
30 Input 17
31 Input 18
32 Input 19
33 Input 20
34 Input 21
35 Input 22
36 Input 23
37 Input 24

Block and wiring diagram

AD-LM 12 FE-Vario, AD-LMB 12 FE-Vario

Dimensions

AD-LM 12 FE-Vario, AD-LMB 12 FE-Vario

CAD / CAE Daten

CAD model is not yet available for this product.

The CAD product overview can be found at: adamczewski.partcommunity.com

Cookie settings
made with ♡ by andres.media