AD-LU 625 GVF

Description

The digital power measuring transducer AD-LU 625 GVF measures all quantities of the three-phase network (current, voltage, energy, harmonics, phase angle, active power, reactive power, apparent power) and converts these measuring values onto two freely scalable analogue outputs. With the integral relay and transistor output, the switching of limiting values or the output of energy pulses is possible. The unit is therefore optimal suitable for integration in energy management systems. The current is measured via additionally available split-core current transformers. For measuring of high voltages, external transformers can be connected in series at any time. All measuring ranges and outputs can be freely parameterized. This can be carried out via the optional operating modul AD-VarioControl or via the programming software AD-Studio. The LEDs at the front signals the operating condition and the relay-status. The compact type of construction and the high performance ability with simultaneous low energy consumption allows usage in almost any application.

AD-LU 625 GVF

Application

Typical usage in plant, machines or energy management systems for balancing and determination of energy distribution.

Specific characteristics

Connection of 3 phases with neutral, any load
Current measurement via split-core current transformers up to 600 A
Measuring quantities: effective power, reactive power, apparent power, currents and voltages, frequency, power factor, harmonics, energy metering
current and voltage output
relay or transistor output
Counters for active power (consuption and infeed), reactive power (inductive and capacitive) and apparent power
33 mm narrow housing with detachable terminal clamp
Operating module AD-VarioControl as an accessory

Business data

Order number
AD-LU 625 GVF
Accessory (optional)
AD-split core current transformer	5/50/100/200/400/600 A AC
Operating module	AD-VarioControl
USB programming adapter	AD-VarioPass
Configuration software	AD-Studio
Identifiers
EClass	27210124
Customs tariff number / country of origin	8543 70 90 / Deutschland

Information

Downloads
Data sheet	en-lu625gvf.pdf (503 kB)
Operation manual VarioControl	man-variocontrol-ad-en.pdf (1 MB)
Safety instructions	ad-safety-instructions.pdf (43 kB)

Technical specifications

Current-inputs (I1...I3)
Measuring ranges	0 ... 0,05 A AC from split core current transformer
Max. measurable harmonic	40
Voltage-inputs (L1...L3)
Measuring range	10 ... 253 V AC
Input resistance	> 1 MOhm
Output current
Output range	0/4 ... 20 mA
Max. load	400 Ohm
Resolution	11 Bit
Residual ripple	25 µAss
Output voltage
Output range	0/2 ... 10 V
Min. load	10 kOhm
Resolution	11 Bit
Residual ripple	20 mVss
Semiconductor output
Maximum switching load DC	30 V, 50 mA
Pulse length min ... max	50 ms ... 10000 ms
Relay output
Maximum switching load AC	250 V, 2 A
Maximum switching load DC	50 V, 2 A
Contact construction	Potential-free changeover
Switching operations mechanical	1 * 10⁷
At 230V/2A AC, cos(phi)=1	6 * 10⁵
At 230V/2A AC, cos(phi)=0,4	2 * 10⁵
At 24V/2A DC	2 * 10⁵
Pulse length min ... max	500 ms ... 10000 ms
Supply
Voltage range AC	50 ... 253 V AC, 50/60 Hz
Nominal voltage AC / DC	230 V AC / 24 V DC
Voltage range DC	20 ... 253 V DC
Power consumption AC / DC	4,6 VA / 2,4 W
Power consumption with operating module AC / DC	4,8 VA / 2,6 W
Transmission behaviour
Basic accuracy	< 0,5 % (class 0.5)
Temperature influence	80 ppm/K
Response time	< 0,5 s
Housing
Dimensions (WxHxD)	33x110x134mm
With operating module (bxhxt)	33x110x138 mm
Type of protection	IP 20
Connection method	Detachable terminal clamp
Terminals, wire cross section	2,5 mm² flex wire / 4 mm² one wire
Bolting torque terminals	0,5 Nm
Skinning length	6 mm
Weight	~ 180 g
Manner of fastening	35 mm DIN rail 35mm
Environmental conditions
Ambient temperature	-10 ... 50 °C
Storage and transport	-10 ... 70 °C (no condensation)
EMC
Product family standard	EN 61326-1 ¹⁾
Emitted interference	EN 55011, CISPR11 Cl. B, Gr. 1
¹⁾ During checking, slight signal deviations are possible.
Electrical safety requirements
Product family standard	EN 61010-1
Overvoltage category	II
Pollution degree	2
Safety measurement	EN 61010-2-030
Measurement category	CAT III
Galvanic isolation, test voltages
Input to outputs / power-supply	4 kV, 50 Hz (1 min.)
Power-supply to outputs	3 kV, 50 Hz (1 min.)
Relay contacts to outputs	3 kV, 50 Hz (1 min.)
Protection circuits
Input	Electrical surge protection
Power supply	Protection against over-temperature, over-voltage and over-current
Analog outputs	Electrical surge protection

Block and wiring diagram

AD-LU 625 GVF

Dimensions

AD-LU 625 GVF

Circuit examples

AD-LU 625 GVF

CAD / CAE Daten

Under "Generate CAD", select the desired CAD model for this product.
For this purpose, registration with our CAD database "PARTcommunity" is required.
The complete CAD product overview can be found at: adamczewski.partcommunity.com

AD-LU 625 GVF

CAD / CAE data

For the display of the CAD / CAE model, we require your consent in advance.

Cookie settings
edit

Display and operating elements

On: LED for operating display in green
on - normal operation
flashing - Signal failure, signal outside range limits
A / Opto: LED for semiconductor switch
on - activated
B / rel: LED for relays
on - activated
AD-PC: Communication interface for configuration by a PC

Communication interface for VarioControl

Modbus Communication

The optional AD-VarioConnect operating module has an RS-485 interface. The data is transferred via the Modbus RTU protocol, the AD-VarioConnect operating module represents a Modbus slave. Communication takes place according to the master-slave procedure and starts with a request from the master, e.g. from a PLC or a PC. Each bus participant must have a unique address. If a slave detects that its address has been addressed by the master, the slave always sends an answer. The slaves never communicate with each other. They are also not able to start a communication with the master.
The Modbus master can read out the individual registers of the AD-LU 625 GVF via the addresses.
The default standard data format is 19200,e,8,1 with slave address 1. These settings can be changed via the AD-VarioConnect operating module.

Start address	Number of registers	Name	Unit	Data type	read	write
Measured values:
40202	1	digital output A		3	1	1
40203	1	digital output B		3	1	1
40204	1	digital output A LED		3	1	1
40205	1	digital output B LED		3	1	1
40501	2	active power total	kW	7	1	0
40503	2	active power total L1	kW	7	1	0
40505	2	active power total L2	kW	7	1	0
40507	2	active power total L3	kW	7	1	0
40509	2	total reactive power	kvar	7	1	0
40511	2	reactive power L1	kvar	7	1	0
40513	2	reactive power L2	kvar	7	1	0
40515	2	reactive power L3	kvar	7	1	0
40517	2	total apparent power	kVA	7	1	0
40519	2	apparent power L1	kVA	7	1	0
40521	2	apparent power L2	kVA	7	1	0
40523	2	apparent power L3	kVA	7	1	0
40525	2	total power factor		7	1	0
40527	2	power factor in L1		7	1	0
40529	2	power factor in L2		7	1	0
40531	2	power factor in L3		7	1	0
40533	2	total active fundamental power	kW	7	1	0
40535	2	active fundamental power L1	kW	7	1	0
40537	2	active fundamental power L2	kW	7	1	0
40539	2	active fundamental power L3	kW	7	1	0
40541	2	total active harmonic power	kW	7	1	0
40543	2	active harmonic power L1	kW	7	1	0
40545	2	active harmonic power L2	kW	7	1	0
40547	2	active harmonic power L3	kW	7	1	0
40549	2	voltage L1	V	7	1	0
40551	2	voltage L2	V	7	1	0
40553	2	voltage L3	V	7	1	0
40555	2	current N line (calculated)	A	7	1	0
40557	2	current in L1	A	7	1	0
40559	2	current in L2	A	7	1	0
40561	2	current in L3	A	7	1	0
40563	2	voltage peak L1	V	7	1	0
40565	2	voltage peak L2	V	7	1	0
40567	2	voltage peak L3	V	7	1	0
40569	2	current peak L1	A	7	1	0
40571	2	current peak L2	A	7	1	0
40573	2	current peak L3	A	7	1	0
40575	2	frequency	Hz	7	1	0
40577	2	phase angle Phi L1	°	7	1	0
40579	2	phase angle Phi L2	°	7	1	0
40581	2	phase angle Phi L3	°	7	1	0
40583	2	temperature	°C	7	1	0
40585	2	phase angle Psi L1	°	7	1	0
40587	2	phase angle Psi L2	°	7	1	0
40589	2	phase angle Psi L3	°	7	1	0
40801	2	output current	mA	7	1	0
40803	2	output voltage	V	7	1	0
Counter:
44003	2	counter kWh - consuption	kWh	5	1	1
44005	2	counter kWh - infeed	kWh	5	1	1
44007	2	counter kVarh - inductiv	kVarh	5	1	1
44009	2	counter kVarh - capacitiv	kVarh	5	1	1
44011	2	counter kVAh - apparent energy	kVAh	5	1	1

Legend of the datatypes:

U08: 1	S08: 2	U16: 3	S16: 4	U32: 5	S32: 6	float: 7