Filter searchAD-IS 102 GVC
Description
The pulse summator AD-IS 102 GVC adds pulses arriving at two inputs and gives out sum-proportional pulses via its relay or transistor outputs. During this, the input pulses can be ready in any sequence and also at the same time. Each input can be assessed freely, this way differently assessed pulses can also be added. For evaluation of the inputs only whole number factors or divisors are possible. Mechanical contacts, NAMUR transmitter, active signals and semi-conductor switches can be connected and evaluated. The device can be parameterized by the customer via the optional PC configuration software AD-Studio, however, it can also be delivered preset. The inputs and outputs as well as the power pack are galvanic separated with high insulation. The transfer function of the device is: O = (I1*(F1/D1)) + (I2*(F2/D2)) O = output, I = input, F = factor, D = divisor
Application
Adding of any quantity signals, such as through-flows or energy. Application example of energy balance: Input 1: 1000 Imp/kWh, Input 2: 10 Imp/kWh, Output: 100 Imp/kWh
Specific characteristics
- 2 freely assessable impulse inputs
- relay output or transistor output
- integral wide-range power pack
- compatible with many types of transmitters
- max. input frequency 1 kHz
- only 18 mm construction width
- screw terminals can be pulled off
- can be parameterized via PC (AD-Studio)
| Downloads | |
|---|---|
| Data sheet |  en-is102gvc.pdf (187 kB) |
| Safety instructions | ad-safety-instructions.pdf (43 kB) |
