AD-MM 400 FE

Description

The Monitor module AD-MM 400 FE is a display and control unit for front panel mounting. The device can be used as master or slave. As a master, the device reads the displayed values of devices that are connected via the RS485 interface with the AD-MM 400 FE. The display values are polled at a certain time frame. The display values can be any data such as measured values, output values, digital inputs or outputs or various counters for energy or amounts. In addition to the display function, the AD-MM 400 FE can configure the connected devices via the menu. As a slave, the device can also be used as pure display device, where the display values are then sent from a master to the AD-MM 400.

AD-MM 400 FE

Application

Display measurements in a graphic display. Scroll through multiple views. Configuration of connected devices via their menu.

Specific characteristics

Connection in the master operation of up to 32 slaves. Scroll up to 10 different user-configurable displays. Display of up to 4 values per display. Freely configurable labeling of the displays and values. Convenient configuration of the displays via PC software AD-Studio. Connection of several AD-MM 400 FE on a bus in slave mode.

Business data

Order number
AD-MM 400 FE
Identifiers
EClass 27210300
Customs Tariff Number 8531 20 40

Information

Downloads
Data sheet pdf en-mm400fe.pdf (323 kB)
Safety instructions pdf ad-safety-instructions.pdf (43 kB)

Technical specifications

Supply
Supply voltage 20 ... 253 V AC/DC
Max. power consumption 1,0W / 2,0VA
Housing
Dimensions (WxHxD) 96x96x63 mm
Front panel cut out 92x92 mm
Protection class panel IP 54
Protection class connection IP 20
Connection method Detachable terminal clamp
Manner of fastening Panel-mount-case
Weight 205 g
Environmental conditions
Ambient temperature -10 ... 50 °C
Storage and transport -10 ... 70 °C (no condensation)
EMC
Product family standard EN 61326-1
Emitted interference EN 55011, CISPR11 Cl. B, Gr. 1
Electrical safety requirements
Product family standard EN 61010-1
Interface 1
Standard RS-485
Protocol Modbus-RTU
Max. attendance 32
Max. length of bus 100 m
Bus termination 120 Ohm (both sites of the bus)
Wiring Bus topology
Interface 2
Standard UART, proprietary
Function Configuration
Display
Type 3,5" TFT
Resolution 320x240 Pixel
Operation
Type 3 short-stroke keys

Block and wiring diagram

AD-MM 400 FE

Dimensions

AD-MM 400 FE

Circuit examples

AD-MM 400 FE

We only use technically necessary cookies to improve the user-friendliness of our site.
Cookies for analysis and marketing purposes are not used!
You can find further information in our privacy policy.
made with ♡ by andres.media