AD-MM 500 FE


The AD-MM 500 FE monitor module is a display device, control unit and data logger for front panel installation. The AD-MM 500 FE always works as a Modbus master. It collects the values that are to be displayed or logged cyclically from one or more Modbus slaves. The values can be any data such as measured values, output values, digital inputs or outputs or various counters for energy or quantities. The display is done by freely configurable display elements such as numeric display, bar graphs, time diagrams, drag pointers, LEDs, etc. In addition to the display function, the AD-MM 500 FE can also configure connected devices from ADAMCZEWSKI. To do this, you can navigate in the menu of the connected device and configure the desired parameter. The logged data is saved on an internal micro SD card. They can be picked up at any time with a USB stick.

AD-MM 500 FE


Display measurements in a graphic display. Scroll through multiple views. Configuration of connected devices via their menu. Log the data for later evaluation.

Specific characteristics

  • Connection in the master operation of up to 32 slaves.
  • Scroll up to 10 different user-configurable displays.
  • Display of up to 4 values per display.
  • Freely configurable labeling of the displays and values.
  • Convenient configuration of the displays via PC software AD-Studio.
  • Connection of several AD-MM 400 on a bus in slave mode.

Business data

Order number
AD-MM 500 FE
EClass 27210300
Customs tariff number / country of origin 8542 31 90 / Deutschland


Data sheet pdf en-mm500fe.pdf (143 kB)
Instruction manual pdf man-mm500fe-ad-en.pdf (697 kB)
Safety instructions pdf ad-safety-instructions.pdf (43 kB)

Technical specifications

Supply voltage 20 ... 253 V DC
Supply voltage 50 ... 253 V AC
Max. power consumption 2,0W / 4,0VA
Dimensions (WxHxD) 96x96x63 mm
Front panel cut out 92x92 mm
Protection class panel IP 54
Protection class connection IP 20
Connection method Detachable terminal clamp
Manner of fastening Panel-mount-case
Weight 350 g
Environmental conditions
Ambient temperature -10 ... 50 °C
Storage and transport -10 ... 70 °C (no condensation)
Pollution degree 2
Product family standard EN 61326-1
Emitted interference EN 55011, CISPR11 Cl. B, Gr. 1
Electrical safety requirements
Product family standard EN 61010-1
Connection 3-pin socket 3.81mm grid
Standard RS-485
Function Modbus-Master
Protocol Modbus-RTU
Max. attendance 32
Max. length of bus 100m - twisted, shielded cable
Bus termination 120 Ohm (both sites of the bus)
Configuration interface
Connection 3.5mm jack socket
Standard UART, proprietary
Function Configuration
Network interface
Connection RJ45 socket
Standard Ethernet
Function Reserve for future expansions
USB interface
Connection Type A socket for USB stick
Standard USB 1.0, 2.0
Function Data transfer
Type 3,5" TFT
Resolution 320x240 Pixel
Type 3 short-stroke keys
Data logger
Internal memory size 2 GB (andere auf Anfrage)
Internal storage medium µSD, single level cell
Sampling interval 1s ... ~18h
Max. channels 32
Data format *.csv

Block and wiring diagram

AD-MM 500 FE


AD-MM 500 FE

We only use technically necessary cookies to improve the user-friendliness of our site.
Cookies for analysis and marketing purposes are not used!
You can find further information in our privacy policy.
made with ♡ by