AD-TV 420 GVD

Description

The isolation amplifier AD-TV 420 GVD serves the galvanic separation of analogue signals and of transmitter signals. When a 2-wire transmitter is connected, this will be supplied directly via a galvanically separated and current-limited supply voltage. All measuring ranges and outputs can be freely parameterized. This can be carried out via the optional operating panel AD-VarioControl or via the programming software AD-Studio. The wide bipolar input measuring range makes this buffer amplifier into the universal type for almost all applications in the area of standard signals and beyond. All supply ranges are covered with the wide range power pack.

AD-TV 420 GVD

Application

Amplification, transformation and electrical isolation of current or voltage signals

Specific characteristics

bipolar current input (+/- 0,5 mA bis +/- 50 mA) bipolar voltage input (+/- 1 V bis +/- 100 V) Power supply for 2- / 3-wire transmitters 2 bipolar current or voltage output Operating module as an accessory 23 mm narrow housing with detachable terminal clamp

Business data

Order number
Isolation amplifier AD-TV 420 GVD
Accessory (optional)
Operating module AD-VarioControl / AD-VarioConnect
USB programming adapter AD-Variopass
Configuration software AD-Studio
Identifiers
EClass 27210120
Customs Tariff Number 8543 70 90

Information

Technical specifications

Input current
Measuring range -50 ... + 50 mA DC
Input resistance 40 Ohm
Input voltage
Measuring range -100 ... + 100 V DC
Input resistance 1 MOhm
Transmitter supply
Off-load voltage 24,5 V
Voltage at 20mA 19,5 V
Current limit ~ 25 mA
Current outputs
Max. output range -21,5 ... 21,5 mA DC
Max. burden 400 Ohm
Residual ripple 40 µAss
Voltage outputs
Max. output range -10,5 ... 10,5 V DC
Min. burden 10 kOhm
Residual ripple 30 mVss
Resolution
Input 16 bit
Output 12 bit
Transmission behaviour
Linearity error 0,2 % of full scale
Rise time 200 ms (output auf 90 %)
Temperature influence +/- 100 ppm/K of full scale
Supply
Voltage range AC 50 ... 253 V AC, 50/60 Hz
Nominal voltage AC 230 V AC
Voltage range DC 20 ... 253 V DC
Nominal voltage DC 24 V DC
Power consumption AC / DC 4,4 VA / 2,8 W
Housing
Dimensions (WxHxD) 23x110x134 mm
With operating module (bxhxt) 23x110x138 mm
Type of protection IP 20
Connection method Detachable terminal clamp
Terminals, wire cross section 2,5 mm² flex wire / 4 mm² one wire
Bolting torque terminals 0,5 Nm
Weight ~ 150 g
Manner of fastening 35 mm DIN rail 35mm
Environmental conditions
Ambient temperature -10 ... 50 °C
Storage and transport -10 ... 70 °C (no condensation)
EMC
Product family standard 1) EN 61326-1
Emitted interference EN 55011, CISPR11 Cl. B, Gr. 1
1)During electromagnetic disturbance minor changes in output signal are possible.
Electrical safety requirements
Product family standard EN 61010-1
Overvoltage category II
Pollution degree 2
Galvanic isolation, test voltages
Input/output 3,51 kV (1 min)
Signal/auxiliary voltage 3,75 kV (1 min)

Block and wiring diagram

AD-TV 420 GVD

Dimensions

AD-TV 420 GVD

We only use technically necessary cookies to improve the user-friendliness of our site.
Cookies for analysis and marketing purposes are not used!
You can find further information in our privacy policy.
made with ♡ by andres.media